Video Matrix Switch

Features & Applications

The VEEMUX^® SM-nXm-15V-LCD video matrix switch routes video from many computers to multiple displays (projectors, monitors, etc.) This switch can drive standard VGA cables, thus eliminating the need for external interfaces and coax cble connections via BNC connectors.

Signals from a range of input sources can be distributed to various output devices, in essence creating a "matrix" pattern of interconnection possibilities. A single computer video output can be routed to one or more monitors. Each image will be as crisp and clear as if directly connected to the original source. Each video output is buffered from each input, insuring signal integrity throughout the system.

• Configure and control the switch through Ethernet, serial port or front panel buttons.

  • Control switching via optional Infrared remote control.
• Matrix Control Software with Graphical User Interface (GUI control) is included with the product.
• Equipped with Liquid Crystal Display (LCD) for front panel operation.
• Switch VGA video directly.
• Each output provides one video signal.
• Each input can be independently connected to any or all outputs.
• Video bandwidth is 200 MHz or greater.
• Supports 1920x1200 video resolution at a refresh rate of 85 Hz.

The VEEMUX switch is the ideal solution for any application where information from many computers is being presented, such as:

• Classrooms.
• Boardrooms.
• Trade shows.
• Conference and entertainment facilities.
• Courtrooms.
• Command centers.
• Control rooms.

Specifications

Video Input

Video Output

• Two female 15-pin HD connectors.
• 1920x1200 video resolution with no degradation.
• Impedance: 75 Ohms.
• Bandwidth: 200 Mhz, fully loaded.

Power

• 110 or 220 VAC at 50 or 60 Hz via AC Adapter.
• Power consumption: 5W
• Use the PWR-48V-5V1A DC-DC power converter to install the
  SM-4X2-15V-LCD in a Telecom environment.

MTBF

• SM-4X2-15V-LCD: 72,513 hrs.
• SM-4X2-15V-LCD-DT: 82,897 hrs.

Cables

• Interface cables between the computers and the switch are required for proper operation.
• Recommended NTI video cables:
  • VGA interface cable (VEXT-xx-MM).
  • VGA to BNC cable (VINT).
• Cables not included.

Environmental

• Operating temperature: 32°F to 100°F (0°C to 38°C).
• Storage temperature: -20°F to 140°F (-30°C to 60°C).
• Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.

Regulatory Approvals

CAD Drawing

• 4x2 CAD Drawing

Warranty

• Two years

Control Methods

Standard

• Front Panel Interface
• RS232 Control
• Ethernet Control

Optional

• Infrared Remote Control
• Desktop Chassis

Download RS232 Matrix Switcher Control Program

• Installation Instructions
• Install setup.exe

Download Ethernet Control Firmware

• Download new firmware files

(Please click the image to enlarge)