Features & Applications The VEEMUX?SM-8X4-HDA is a versatile multi-input audio/video matrix switch that independently switches eight sets of YPbPr component video and analog/digital audio signals to any or all of the four outputs. Each input and output has YPbPr component video, L/R analog audio (balanced/unbalanced), and digital audio on coax (S/PDIF). Supports High Definition and Standard Definition YPbPr component component video, S-Video or composite video. Audio can be unbalanced analog stereo, balanced analog stereo or digital S/PDIF. Supports 480i (interlaced), 480p (progressive), 720i, 720p, 1080i, and 1080p formats. Features break-away audio-allows audio to be switched independent of video. Equipped with volume control: -80dB to 10dB, in 1dB steps. Control the switch through Ethernet, RS232 or front panel buttons. The SM-8X4-HDA is the ideal solution for many applications, such as digital signage, mission critical command centers, sports facilities and entertainment venues.
Specifications Video- BNC connectors.
- Signal type: HDTV YPbPr component, S-Video, composite
- Inputs and outputs must be of the same format.
- Maximum input/output levels: 2Vp-p.
- Input/output impedance: 75 Ohms
- Video crosstalk: <-60dB
- Video gain: unity
- Bandwidth:>150MHz, fully loaded
- Resolutions: HDTV 480i, 480p, 720i, 720p, 1080i, and 1080p.
Stereo Audio- Screw terminal connectors.
- Signal type: balanced stereo audio, unbalanced stereo audio, analog, left/right
- Inputs and outputs must be of the same format.
- Maximum input/output levels: 2.5Vp-p.
- Input impedance: 10K Ohms
- Output impedance: 50 Ohms
- Frequency Response: +/-0.05 dB, 20 Hz to 20 kHz.
- Total Harmonic Distortion + Noise (THD+N): 0.03% at 1kHz.
- Signal-to-Noise Ratio (SNR): >80 dBA
- Stereo Channel Separation: <-90 dBA
- Output gain: -80dB to 10dB
Digital Audio- BNC connectors
- Signal type: S/PDIF, DTS Digital Surround? Dolby Digital?5.1
- Inputs and outputs must be of the same format.
- Maximum input/output levels: 1Vp-p (unbalanced).
- Input/output impedance: 75 Ohms
Power- 110 or 220 at 50 or 60 Hz via IEC connector.
DimensionsEnvironmental- Operating temperature: 32°F to 100°F (0°C to 38°C).
- Storage temperature: -20°F to 140°F (-30°C to 60°C).
- Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
Regulatory ApprovalsWarranty
(Please click the image to enlarge) Control Methods Front Panel Interface- Configuration and control can be done using the front panel buttons.
- Liquid Crystal Display (LCD) displays all current connections.
- Locally change input and output selections with front panel buttons.
Ethernet Control- Configuration and control can be done over the Internet via Web Server and Telnet.
- RJ45 connector with LEDs
- 10/100Base-T Ethernet interface
- Supported protocols: HTTP, HTTPS, Telnet
RS232 Control- Configuration and control can be done through the serial port.
- Female 9-pin D connector.
- Baud rate selectable from 1200, 2400, 4800, 9600.
- Supports Tx, Rx; RTS wired to CTS; DTR wired to DSR and CD
Download Ethernet Control Firmware |