HDMI Extender with IR Option via One CAT5e/6/7

Features & Applications

The XTENDEX^® HDMI Extender transmits digital video and audio signals up to 300 feet using one CAT5e/6/7 cable. Each video extender consists of a local unit that connects to an HDMI source and optional IR emitter, and a remote unit that connects to an HDMI display and optional IR receiver.

• Transmits an HDMI signal over one CAT5e/6/7 cable.
• Available with optional support for Infared Remote (IR) control.
  • Full IR control of HDMI source from remote HDTV using existing source remote control.
• Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200.
• HDMI features supported:
  • 12-bit Deep Color
  • x.v.Color
  • Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, and DTS
  • Bandwidth up to 225 MHz (6.75 Gbps)
  • Support for CEC (consumer electronic control) compatible devices.
  • Lip Sync
• HDCP compliant.
• Supports the DDC2B protocol.
• Only one power supply is necessary to power both the local and remote units.

Specification

Local Unit

• Compatible with a computer or HDTV video source with HDMI output
• One female HDMI connector.
• Optional IR extension support: one female 3.5mm port for IR emitter.
• One female RJ45 port for sending/receiving high definition video/audio signals, IR signal, CEC signal, and DDC signal.

Remote Unit

• One female HDMI connector for display.
• Optional IR extension support: one female 3.5mm port for IR receiver.
• One female RJ45 port for sending/receiving high definition video/audio signals, IR signal, CEC signal, and DDC signal.
• Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200.
• Supports embedded digital audio through HDMI compatible TVs or audio receivers.
• Auto equalization for different lengths of CAT5e/6/7 cable.

Power

• Powered from a single power supply attached to either the local or remote unit.
• Local or remote unit: 100 to 240 VAC at 50 or 60 Hz via AC adapter. (Country-specific AC adapter included.)

Cables

• Use HDMI-xx-MM cable to connect an HDMI source or display.
• Use DVI-HDMI-xx-MM cable to connect a DVI source or display.
• Use CAT5e/6/7 straight through cable for TIA/EIA-568B wiring terminated with standard RJ45 connectors (not included).
• ST-C6HDMI-IR-300: IR transmitter/receiver included.

Environmental

• Operating temperature: 32 to 122°F (0 to 50°C).
• Storage temperature: -20 to 140°F (-30 to 60°C).
• Operating and Storage Relative Humidity: 5 to 90% non-condensing RH.

Dimensions

• WxDxH (in): 2.5x3.1x1.2

Regulatory Approvals

• CE, RoHS

Warranty

• Two years.

Distances and Resolutions for CAT5e/CAT6 and CAT7 Cables