DVI Extender via Fiber Optic Cable up to 1,500 Meters

Features & Applications

The XTENDEX® ST-2FODVI-LC DVI Extender via Fiber Optic Cable locates a single link digital DVI display away from a computer up to 4,920 feet(1,500 meters) using singlemode fiber optic cable and 1,640 feet (500 meters) using multimode fiber optic cable. Each extender consists of a transmitter that connects to a computer and a receiver that connects to a monitor.

• „Ideal solution for digital signage applications.„ 
• Supports computer resolutions to 1920x1200.„ 
• Signal transmission via two strand singlemode or multimode LC fiber optic cable – no RF interference.
  • Using singlemode cable, extend to 4,920 feet.
  • Using multimode cable, extend to 1,640 feet.„ 
• Small form factor – allowing for easy connection and placement.„ 
• Cables can be installed in conduit prior to extender installation.„ 
• EDID learning for the support of any DVI display device.„ 
• Low RFI/EMI for sensitive applications.„ No software to install.
• No software to install.

The DVI Optical Extender is the ideal solution for a wide range of applications. Examples include:

• Remote DVI display monitoring for medical, military, aerospace, industrial and traffic control applications.
• Digital Flat Panel Displays (FPD), Plasma Display Panels (PDP) and projectors in conference rooms and auditoriums.
• Kiosks with digital FPDs.
• Color LED signboards, FPDs and PDPs for information display at stadiums.

Specifications

• Resolution: up to 1920x1200.„ 
• Connectors (for transmitter and receiver): one male DVI-D singlelink connector and two LC fiber connectors.„ 
• Maximum distance: 4,920 feet using singlemode cable and 1,640feet using multimode cable.„ 
• Compliant with DDWG DVI standard.„ 
• EDID learning for the support of any DVI display device.„
• Low RFI/EMI.

Dimensions

• WxDxH (in): 1.5x2.7x0.6

Cables

• Use a FIBER-D-LCLC-50-xxM duplex multimode LC 50-micronfiber optic cable to extend the receiver from the transmitter up to1,640 feet (not included).„ 
• Use a duplex singlemode LC 9-micron fiber optic cable to extendthe receiver from the transmitter up to 4,920 feet (not included).

Power

• 100 to 240 VAC at 50 or 60 Hz via AC adapter.„ 
• Power consumption: 5W (each – transmitter and receiver).

Regulartory Approvals

• CE, FCC, RoHS

Environmental„

• Operating Temperature: 32°F to 122°F (0°C to 50°C).„
• Storage Temperature: 14°F to 185°F (-10°C to 85°C).„
• Operating and Storage Relative Humidity: 5 to 85% non-condensing RH.

Configuration and Cable Illustration